Putting up a decent power-driven fence is everything. The excellence of the electric fencing for livestock is dependent on farmers’ willingness to invest quality materials to come up with something presentable. Results are as good as the inputs in terms of finances and skilled manpower. Time taken to construct the fence is also a factor that determines the quality..
Key things to consider when buying an electrical fence
It is worth noting that power-driven fence equipment should be procured from a well-known company. Before purchasing the materials for electrical fencing for livestock, it is important to seek the advice of an expert to get the right materials that will serve the purpose and produce the best results. When purchasing power driven fence, you should consider buying one that has a bigger voltage. This is important to ensure sufficient power is flowing however; Different voltages are needed during different seasons. For example, a voltage of 2000 is needed during summer while a voltage of 4000 is needed during winter.
Fence installation
Rodents can be very destructive, to avoid the effects they can cause, when installing the fence ensure to Install within areas that are not easily accessible by these rodents. Additionally, ensure to install properly the grounds rod.
Foundations are very important even in normal building constructions. The ground system of the electrical fence is very important. Proper fixing should be done; Rods should be fixed at least 3 meters away from each other. It is advisable to use galvanized material to curve the problem of rusting.
Wire
The other key thing to note is the importance of insulators. The insulator can be fixed as shown in the figure below.
Fence Maintenance; The don’ts of electric fencing
A Voltmeter is a crucial tool that can be used in maintaining the livestock fence. It helps ensure the suitable voltage is conveyed consistently. In addition to a voltmeter, a fault-finder helps speed up the repairing process. Ensure no fallen trees on wires as this may reduce the power flowing via the wire. During winter, the energizer needs to be stored in a clean place.
Barbwire should not be used on gates. It is risky to overtighten the wires during installation. This is because during winter there is usually a lot of contraction. When this happens, the braces are pulled out. Do not take in cattle that have not undergone the training on how to put up in an electric fence.
In conclusion, quality electrical fencing for livestock depends on the input of the farmer. For durability, good care and maintenance are inevitable. For the fence to last a long time, then all the don’ts discussed above must be followed to the latter.